VICE encounters illegal instruction

  • Open
  • quality assurance status badge
Details
2 participants
  • Ludovic Courtès
  • Csepp
Owner
unassigned
Submitted by
Csepp
Severity
normal
C
C
Csepp wrote on 12 Sep 2023 13:27
(address . bug-guix@gnu.org)
cuc1qf3vd81.fsf@riseup.net
trying to run a music disk, but even if I pass no parameter, I get the
same error at the end

% xplus4 TED-Vibes-2.d64 :(
Detecting ISA HardSID boards.
Could not open '/dev/port'.
Cannot get permission to access $300.
Detecting PCI HardSID boards.
No PCI HardSID boards found.
*** VICE Version 3.7.1 ***
Welcome to xplus4, the free portable PLUS4 Emulator.
Current VICE team members:
Martin Pottendorfer, Marco van den Heuvel, Fabrizio Gennari, Groepaz,
Errol Smith, Ingo Korb, Olaf Seibert, Marcus Sutton, Kajtar Zsolt, AreaScout,
Bas Wassink, Michael C. Martin, Christopher Phillips, David Hogan,
Empathic Qubit, Roberto Muscedere, June Tate-Gans, Pablo Roldan.
This is free software with ABSOLUTELY NO WARRANTY.
See the "About VICE" command for more info.
random seed was: 0x65004c19
command line was: xplus4 TED-Vibes-2.d64
Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/PLUS4/kernal-318004-05.bin'.
Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/PLUS4/basic-318006-01.bin'.
Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/PLUS4/3plus1-317053-01.bin'.
Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/PLUS4/3plus1-317054-01.bin'.
GTK3MOUSE: Status changed: 0 (disabled)
Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/PRINTER/mps803.bin'.
Palette: Loading palette `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/PRINTER/mps803.vpl'.
Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/PRINTER/nl10.bin'.
Palette: Loading palette `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/PRINTER/nl10.vpl'.
NL10: Printer driver initialized.
Palette: Loading palette `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/PRINTER/1520.vpl'.
Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/DRIVES/dos1540-325302+3-01.bin'.
Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/DRIVES/dos1541-325302-01+901229-05.bin'.
Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/DRIVES/dos1541ii-251968-03.bin'.
Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/DRIVES/dos1570-315090-01.bin'.
Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/DRIVES/dos1571-310654-05.bin'.
Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/DRIVES/dos1581-318045-02.bin'.
DriveROM: Error - 2000 ROM image not found. Hardware-level 2000 emulation is not available.
DriveROM: Error - 4000 ROM image not found. Hardware-level 4000 emulation is not available.
DriveROM: Error - CMDHD ROM image not found. Hardware-level CMDHD emulation is not available.
Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/DRIVES/dos1551-318008-01.bin'.
Drive: Finished loading ROM images.
Sound: Available sound devices: pulse alsa dummy fs dump wav voc iff aiff soundmovie
using GTK3 backend: OpenGL
chip_name: TED
screen_size: 384 x 312
first/lastline: 0 x 0
gfx_size: 320 x 200
gfx_position: 32 x 59
first/last displayed line: 19 x 306
extra offscreen border left/right: 28 x 228
screen_display_wh: 0.000000 x 0.000000
canvas_physical_wh: 0 x 0
scalexy: 2 x 2
sizexy: 1 x 1
rmode: 1
aspect ratio: 1.037435
hstretch: 0
vstretch: 0
initializing with width, height: 704 x 574
GLX version: 1.4
Getting matching framebuffer configs
Found 6 matching FB configs.
Error - Failed to obtain an OpenGL 3.2 context, requesting a legacy context

Obtained OpenGL 2.1 context
Vendor: Intel
Renderer: Mesa Mobile Intel® GM45 Express Chipset (CTG)
Version: 2.1 Mesa 23.1.4
Legacy: yes
Direct GLX rendering context obtained
Swap control support. glXSwapIntervalMESA: 1 glXSwapIntervalEXT: 1 glXSwapIntervalSGI: 1
Created render thread 0
Render thread initialised
Joystick: Linux joystick interface initialization...
Joystick: Warning - Cannot open joystick device `/dev/input/js0'.
Joystick: Warning - Cannot open joystick device `/dev/input/js1'.
Joystick: Warning - Cannot open joystick device `/dev/input/js2'.
Joystick: Warning - Cannot open joystick device `/dev/input/js3'.
Joystick: Warning - Cannot open joystick device `/dev/input/js4'.
Joystick: Warning - Cannot open joystick device `/dev/input/js5'.
Joystick: Warning - Cannot open joystick device `/dev/input/js6'.
Joystick: Warning - Cannot open joystick device `/dev/input/js7'.
Loading keymap `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/PLUS4/gtk3_sym.vkm'.
HOTKEYS: Hotkeys: Initializing.
HOTKEYS: Hotkeys: Parsing PLUS4 hotkeys file:
HOTKEYS: Hotkeys: OK.
AUTOSTART: Autodetecting image type of `TED-Vibes-2.d64'.
AUTOSTART: Attached file `TED-Vibes-2.d64' as a disk image.
AUTOSTART: mounted image is type: 1541, not changing drive.
AUTOSTART: Resetting drive 8
AUTOSTART: Resetting the machine to autostart '*'
Sound: Opened device `pulse', speed 48000Hz, fragment size 2.67ms, buffer size 32.00ms
[1] 4880 illegal hardware instruction xplus4 TED-Vibes-2.d64
C
C
Csepp wrote on 13 Sep 2023 04:55
(name . Csepp)(address . raingloom@riseup.net)
cucsf7iok22.fsf@riseup.net
Csepp <raingloom@riseup.net> writes:

Toggle quote (100 lines)
> trying to run a music disk, but even if I pass no parameter, I get the
> same error at the end
>
> % xplus4 TED-Vibes-2.d64 :(
> Detecting ISA HardSID boards.
> Could not open '/dev/port'.
> Cannot get permission to access $300.
> Detecting PCI HardSID boards.
> No PCI HardSID boards found.
>
> *** VICE Version 3.7.1 ***
>
> Welcome to xplus4, the free portable PLUS4 Emulator.
>
> Current VICE team members:
> Martin Pottendorfer, Marco van den Heuvel, Fabrizio Gennari, Groepaz,
> Errol Smith, Ingo Korb, Olaf Seibert, Marcus Sutton, Kajtar Zsolt, AreaScout,
> Bas Wassink, Michael C. Martin, Christopher Phillips, David Hogan,
> Empathic Qubit, Roberto Muscedere, June Tate-Gans, Pablo Roldan.
>
> This is free software with ABSOLUTELY NO WARRANTY.
> See the "About VICE" command for more info.
>
> random seed was: 0x65004c19
> command line was: xplus4 TED-Vibes-2.d64
> Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/PLUS4/kernal-318004-05.bin'.
> Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/PLUS4/basic-318006-01.bin'.
> Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/PLUS4/3plus1-317053-01.bin'.
> Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/PLUS4/3plus1-317054-01.bin'.
> GTK3MOUSE: Status changed: 0 (disabled)
> Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/PRINTER/mps803.bin'.
> Palette: Loading palette `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/PRINTER/mps803.vpl'.
> Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/PRINTER/nl10.bin'.
> Palette: Loading palette `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/PRINTER/nl10.vpl'.
> NL10: Printer driver initialized.
> Palette: Loading palette `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/PRINTER/1520.vpl'.
> Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/DRIVES/dos1540-325302+3-01.bin'.
> Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/DRIVES/dos1541-325302-01+901229-05.bin'.
> Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/DRIVES/dos1541ii-251968-03.bin'.
> Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/DRIVES/dos1570-315090-01.bin'.
> Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/DRIVES/dos1571-310654-05.bin'.
> Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/DRIVES/dos1581-318045-02.bin'.
> DriveROM: Error - 2000 ROM image not found. Hardware-level 2000 emulation is not available.
> DriveROM: Error - 4000 ROM image not found. Hardware-level 4000 emulation is not available.
> DriveROM: Error - CMDHD ROM image not found. Hardware-level CMDHD emulation is not available.
> Loading system file `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/DRIVES/dos1551-318008-01.bin'.
> Drive: Finished loading ROM images.
> Sound: Available sound devices: pulse alsa dummy fs dump wav voc iff aiff soundmovie
> using GTK3 backend: OpenGL
> chip_name: TED
> screen_size: 384 x 312
> first/lastline: 0 x 0
> gfx_size: 320 x 200
> gfx_position: 32 x 59
> first/last displayed line: 19 x 306
> extra offscreen border left/right: 28 x 228
> screen_display_wh: 0.000000 x 0.000000
> canvas_physical_wh: 0 x 0
> scalexy: 2 x 2
> sizexy: 1 x 1
> rmode: 1
> aspect ratio: 1.037435
> hstretch: 0
> vstretch: 0
> initializing with width, height: 704 x 574
> GLX version: 1.4
> Getting matching framebuffer configs
> Found 6 matching FB configs.
> Error - Failed to obtain an OpenGL 3.2 context, requesting a legacy context
>
> Obtained OpenGL 2.1 context
> Vendor: Intel
> Renderer: Mesa Mobile Intel® GM45 Express Chipset (CTG)
> Version: 2.1 Mesa 23.1.4
> Legacy: yes
> Direct GLX rendering context obtained
> Swap control support. glXSwapIntervalMESA: 1 glXSwapIntervalEXT: 1 glXSwapIntervalSGI: 1
> Created render thread 0
> Render thread initialised
> Joystick: Linux joystick interface initialization...
> Joystick: Warning - Cannot open joystick device `/dev/input/js0'.
> Joystick: Warning - Cannot open joystick device `/dev/input/js1'.
> Joystick: Warning - Cannot open joystick device `/dev/input/js2'.
> Joystick: Warning - Cannot open joystick device `/dev/input/js3'.
> Joystick: Warning - Cannot open joystick device `/dev/input/js4'.
> Joystick: Warning - Cannot open joystick device `/dev/input/js5'.
> Joystick: Warning - Cannot open joystick device `/dev/input/js6'.
> Joystick: Warning - Cannot open joystick device `/dev/input/js7'.
> Loading keymap `/gnu/store/xl99j30yh624c4zzq3wzrkqv1v4zs9lm-vice-3.7.1/share/vice/PLUS4/gtk3_sym.vkm'.
> HOTKEYS: Hotkeys: Initializing.
> HOTKEYS: Hotkeys: Parsing PLUS4 hotkeys file:
> HOTKEYS: Hotkeys: OK.
> AUTOSTART: Autodetecting image type of `TED-Vibes-2.d64'.
> AUTOSTART: Attached file `TED-Vibes-2.d64' as a disk image.
> AUTOSTART: mounted image is type: 1541, not changing drive.
> AUTOSTART: Resetting drive 8
> AUTOSTART: Resetting the machine to autostart '*'
> Sound: Opened device `pulse', speed 48000Hz, fragment size 2.67ms, buffer size 32.00ms
> [1] 4880 illegal hardware instruction xplus4 TED-Vibes-2.d64

Looks to be an AVX instruction.
The backtrace looks roughly like this:
1: AVX instruction
2-10: ??
11: libc.so.6 start_thread
12: libc.so.6 clone3

Haven't yet found an obvious way to compile VICE without AVX.
R
R
raingloom wrote on 13 Sep 2023 05:48
[PATCH] gnu: Make vice tunable.
(address . guix-patches@gnu.org)
4a6e24ae29f8adca5aa80334f9e07955d15175a6.1694576934.git.raingloom@riseup.net
From: Csepp <raingloom@riseup.net>

* gnu/packages/emulators.scm (vice)[properties]: Set tunable? to #t.
---
This fixes the issue with unsupported AVX instructions.

gnu/packages/emulators.scm | 1 +
1 file changed, 1 insertion(+)

Toggle diff (16 lines)
diff --git a/gnu/packages/emulators.scm b/gnu/packages/emulators.scm
index 1d50c9ef01..dd1e3e877f 100644
--- a/gnu/packages/emulators.scm
+++ b/gnu/packages/emulators.scm
@@ -118,6 +118,7 @@ (define-public vice
(package
(name "vice")
(version "3.7.1")
+ (properties '((tunable? . #t)))
(source
(origin
(method url-fetch)

base-commit: 07d43c66d5c11fef61f9846fefb97fa18e4764f1
--
2.41.0
L
L
Ludovic Courtès wrote on 14 Sep 2023 16:46
(name . raingloom)(address . raingloom@riseup.net)
87o7i4ak43.fsf@gnu.org
Hi,

raingloom <raingloom@riseup.net> skribis:

Toggle quote (6 lines)
> From: Csepp <raingloom@riseup.net>
>
> * gnu/packages/emulators.scm (vice)[properties]: Set tunable? to #t.
> ---
> This fixes the issue with unsupported AVX instructions.

Could you clarify what this means, ideally as a comment above the
property?

Thanks,
Ludo’.
?
Your comment

Commenting via the web interface is currently disabled.

To comment on this conversation send an email to 65890@debbugs.gnu.org

To respond to this issue using the mumi CLI, first switch to it
mumi current 65890
Then, you may apply the latest patchset in this issue (with sign off)
mumi am -- -s
Or, compose a reply to this issue
mumi compose
Or, send patches to this issue
mumi send-email *.patch