Error building installation ISO

  • Done
  • quality assurance status badge
Details
2 participants
  • mikadoZero
  • Simon Tournier
Owner
unassigned
Submitted by
mikadoZero
Severity
normal
M
M
mikadoZero wrote on 3 Apr 2019 02:27
(address . bug-guix@gnu.org)
cucsgv03pce.fsf@yandex.com
I am trying to build an installation ISO so I can test the graphical
installer. I am building an installation ISO on a x86_64 Guix System
for a i686 machine.

`git describe`
v0.16.0-4215-g1aa662b309

I get an error when I run this command:

`guix system disk-image --file-system-type=iso9660 -s i686-linux \
gnu/system/install.scm`

Below is all the output I have from the running the above command.


[ 0.000000] Linux version 5.0.5-gnu (nixbld@) (gcc version 7.4.0 (GCC)) #1 SMP 1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffdffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001ffe0000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c
8995f-prebuilt.qemu.org 04/01/2014
[ 0.000000] last_pfn = 0x1ffe0 max_arch_pfn = 0x1000000
[ 0.000000] Disabled
[ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] found SMP MP-table at [mem 0x000f58a0-0x000f58af] mapped at [(ptrval)
]
[ 0.000000] check: Scanning 1 areas for low memory corruption
[ 0.000000] RAMDISK: [mem 0x1f610000-0x1ffdffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F56B0 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x000000001FFE156F 000030 (v01 BOCHS BXPCRSDT 00000001 BX
PC 00000001)
[ 0.000000] ACPI: FACP 0x000000001FFE144B 000074 (v01 BOCHS BXPCFACP 00000001 BX
PC 00000001)
[ 0.000000] ACPI: DSDT 0x000000001FFE0040 00140B (v01 BOCHS BXPCDSDT 00000001 BX
PC 00000001)
[ 0.000000] ACPI: FACS 0x000000001FFE0000 000040
[ 0.000000] ACPI: APIC 0x000000001FFE14BF 000078 (v01 BOCHS BXPCAPIC 00000001 BX
PC 00000001)
[ 0.000000] ACPI: HPET 0x000000001FFE1537 000038 (v01 BOCHS BXPCHPET 00000001 BX
PC 00000001)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1ffe0000
[ 0.000000] low ram: 0 - 1ffe0000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000001ffdffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001ffdffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 98 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffdffff]
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] [mem 0x20000000-0xfffbffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff
, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x81/0x479 with crn
g_init=0
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 30 pages/cpu @(ptrval) s94028 r0 d28852 u122880
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129662
[ 0.000000] Kernel command line: panic=1 --load=/gnu/store/c25clavjwl9gj2i0z41j3l
56q4zbhcxb-linux-vm-loader console=ttyS0
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 426348K/523768K available (9093K kernel code, 895K rwdata, 35
12K rodata, 1168K init, 796K bss, 97420K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] cpu_entry : 0xffa00000 - 0xffb31000 (1220 kB)
[ 0.000000] pkmap : 0xff600000 - 0xff800000 (2048 kB)
[ 0.000000] vmalloc : 0xe07e0000 - 0xff5fe000 ( 494 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdffe0000 ( 511 MB)
[ 0.000000] .init : 0xc3d45000 - 0xc3e69000 (1168 kB)
[ 0.000000] .data : 0xc38e1770 - 0xc3d31c00 (4417 kB)
[ 0.000000] .text : 0xc3000000 - 0xc38e1770 (9093 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode
...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 38030 entries in 75 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies
.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 2304, nr_irqs: 256, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] printk: console [ttyS0] enabled
[ 0.000000] ACPI: Core revision 20181213
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_
ns: 19112604467 ns
[ 0.008000] APIC: Switch to symmetric I/O mode setup
[ 0.008000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052000] tsc: Unable to calibrate against PIT
[ 0.052000] tsc: using HPET reference calibration
[ 0.052000] tsc: Detected 1839.218 MHz processor
[ 0.004561] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3505c3
06697, max_idle_ns: 881590419905 ns
[ 0.007484] Calibrating delay loop (skipped), value calculated using timer freque
ncy.. 3678.43 BogoMIPS (lpj=7356872)
[ 0.009239] pid_max: default: 32768 minimum: 301
[ 0.010451] LSM: Security Framework initializing
[ 0.010864] Yama: becoming mindful.
[ 0.016158] AppArmor: AppArmor initialized
[ 0.022202] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.022573] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.066912] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.067549] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.068529] Spectre V2 : Mitigation: Full generic retpoline
[ 0.069104] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on conte
xt switch
[ 0.070159] Speculative Store Bypass: Vulnerable

[ 0.414451] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0x6, mode

[ 0.423918] Performance Events: PMU not available due to virtualization, using so
ftware events only.
[ 0.426451] rcu: Hierarchical SRCU implementation.
[ 0.444809] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.453008] smp: Bringing up secondary CPUs ...
[ 0.453699] smp: Brought up 1 node, 1 CPU
[ 0.454613] smpboot: Max logical packages: 1
[ 0.455226] smpboot: Total of 1 processors activated (3678.43 BogoMIPS)
[ 0.468584] allocated 524288 bytes of page_ext
[ 0.487181] devtmpfs: initialized
[ 0.511158] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_id
le_ns: 7645041785100000 ns
[ 0.512499] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.522045] pinctrl core: initialized pinctrl subsystem
[ 0.541941] RTC time: 16:14:34, date: 2019-04-02
[ 0.555235] NET: Registered protocol family 16
[ 0.563567] audit: initializing netlink subsys (disabled)
[ 0.571344] audit: type=2000 audit(1554221673.620:1): state=initialized audit_ena
bled=0 res=1
[ 0.577810] EISA bus registered
[ 0.578924] cpuidle: using governor ladder
[ 0.579787] cpuidle: using governor menu
[ 0.583576] ACPI: bus type PCI registered
[ 0.584317] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.595123] PCI: PCI BIOS revision 2.10 entry at 0xfd1f9, last bus=0
[ 0.595930] PCI: Using configuration type 1 for base access

[ 0.689072] ACPI: Added _OSI(Module Device)
[ 0.689626] ACPI: Added _OSI(Processor Device)
[ 0.690070] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.690451] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.690824] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.691290] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.691807] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.737973] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.782217] ACPI: Interpreter enabled
[ 0.791883] ACPI: (supports S0 S3 S4 S5)
[ 0.792479] ACPI: Using IOAPIC for interrupt routing
[ 0.794724] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocr
s" and report a bug
[ 0.801827] ACPI: Enabled 2 GPEs in block 00 to 0F

[ 0.922451] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.923864] acpi PNP0A03:00: fail to add MMCONFIG information, can't access exten
ded PCI configuration space under this bridge.
[ 0.945972] acpiphp: Slot [3] registered
[ 0.947081] acpiphp: Slot [4] registered
[ 0.947926] acpiphp: Slot [5] registered
[ 0.948813] acpiphp: Slot [6] registered
[ 0.949634] acpiphp: Slot [7] registered
[ 0.950961] acpiphp: Slot [8] registered
[ 0.951865] acpiphp: Slot [9] registered
[ 0.952746] acpiphp: Slot [10] registered
[ 0.953676] acpiphp: Slot [11] registered
[ 0.955053] acpiphp: Slot [12] registered
[ 0.955904] acpiphp: Slot [13] registered
[ 0.956790] acpiphp: Slot [14] registered
[ 0.957625] acpiphp: Slot [15] registered
[ 0.958832] acpiphp: Slot [16] registered
[ 0.959650] acpiphp: Slot [17] registered
[ 0.960438] acpiphp: Slot [18] registered
[ 0.961296] acpiphp: Slot [19] registered
[ 0.962082] acpiphp: Slot [20] registered
[ 0.963082] acpiphp: Slot [21] registered
[ 0.963892] acpiphp: Slot [22] registered
[ 0.964728] acpiphp: Slot [23] registered
[ 0.965533] acpiphp: Slot [24] registered
[ 0.966753] acpiphp: Slot [25] registered
[ 0.967585] acpiphp: Slot [26] registered
[ 0.968378] acpiphp: Slot [27] registered
[ 0.969233] acpiphp: Slot [28] registered
[ 0.970026] acpiphp: Slot [29] registered
[ 0.970991] acpiphp: Slot [30] registered
[ 0.971864] acpiphp: Slot [31] registered
[ 0.973107] PCI host bridge to bus 0000:00
[ 0.973979] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.974585] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.975333] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.976059] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff window]
[ 0.976834] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff windo
w]
[ 0.978588] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.011589] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 1.012497] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 1.013249] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 1.014671] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 1.020987] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 1.021853] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB

[ 1.206451] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 1.210870] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 1.213357] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 1.214451] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 1.234958] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 1.235888] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+me
m,locks=none
[ 1.236917] pci 0000:00:02.0: vgaarb: bridge control possible
[ 1.237815] vgaarb: loaded
[ 1.249761] SCSI subsystem initialized
[ 1.254932] ACPI: bus type USB registered
[ 1.256418] usbcore: registered new interface driver usbfs
[ 1.257836] usbcore: registered new interface driver hub
[ 1.259485] usbcore: registered new device driver usb
[ 1.264075] EDAC MC: Ver: 3.0.0
[ 1.277200] PCI: Using ACPI for IRQ routing
[ 1.300868] NetLabel: Initializing
[ 1.301314] NetLabel: domain hash size = 128
[ 1.301761] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.306876] NetLabel: unlabeled traffic allowed by default
[ 1.320168] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 1.321605] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.322547] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 1.333998] clocksource: Switched to clocksource tsc-early

[ 1.730370] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.742937] AppArmor: AppArmor Filesystem Enabled
[ 1.745478] pnp: PnP ACPI init
[ 1.763059] pnp: PnP ACPI: found 6 devices
[ 1.763709] PnPBIOS: Disabled
[ 1.869786] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_n

[ 1.870553] NET: Registered protocol family 2
[ 1.893030] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 byte
s)
[ 1.894135] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 1.895915] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 1.896959] TCP: Hash tables configured (established 4096 bind 4096)
[ 1.900731] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 1.901821] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 1.907239] NET: Registered protocol family 1
[ 1.908804] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 1.909744] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 1.911011] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 1.912324] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0
x000dffff]
[ 1.926232] Trying to unpack rootfs image as initramfs...

[ 5.060084] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 5.060824] software IO TLB: mapped [mem 0x1ac0f000-0x1ec0f000] (64MB)
[ 5.065524] check: Scanning for low memory corruption every 60 seconds
[ 5.083746] Initialise system trusted keyrings
[ 5.088016] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 5.136532] zbud: loaded
[ 5.160954] Allocating IMA blacklist keyring.

[ 5.283793] Asymmetric key parser 'x509' registered
[ 5.284820] bounce: pool size: 64 pages
[ 5.285990] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 5.297078] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.305896] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 5.312370] ACPI: Power Button [PWRF]
[ 5.322258] isapnp: Scanning for PnP cards...

[ 5.684747] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 5.713473] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A

[ 5.954252] brd: module loaded
[ 6.005154] loop: module loaded
[ 6.040356] scsi host0: ata_piix
[ 6.047852] scsi host1: ata_piix
[ 6.050075] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14
[ 6.050728] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15
[ 6.067918] libphy: Fixed MDIO Bus: probed
[ 6.068510] tun: Universal TUN/TAP device driver, 1.6
[ 6.071268] PPP generic driver version 2.4.2
[ 6.073978] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.075514] ehci-pci: EHCI PCI platform driver
[ 6.076695] ehci-platform: EHCI generic platform driver
[ 6.077600] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.078433] ohci-pci: OHCI PCI platform driver
[ 6.080073] ohci-platform: OHCI generic platform driver
[ 6.081030] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.086240] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 ir
q 1,12
[ 6.091833] tsc: Refined TSC clocksource calibration: 1839.374 MHz
[ 6.093161] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3506e981182,
max_idle_ns: 881590631235 ns
[ 6.098985] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 6.099812] clocksource: Switched to clocksource tsc
[ 6.101329] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 6.108809] mousedev: PS/2 mouse device common for all mice
[ 6.124638] rtc_cmos 00:00: RTC can wake from S4
[ 6.129147] input: AT
This message was truncated. Download the full message here.
S
S
Simon Tournier wrote on 4 Oct 2023 20:31
(name . mikadoZero)(address . mikadozero@yandex.com)(address . 35114@debbugs.gnu.org)
875y3mz1bv.fsf@gmail.com
Hi,

Sorry, this report #35114 [1] fell into the cracks.


On Tue, 02 Apr 2019 at 20:27, mikadoZero <mikadozero@yandex.com> wrote:
Toggle quote (14 lines)
> I am trying to build an installation ISO so I can test the graphical
> installer. I am building an installation ISO on a x86_64 Guix System
> for a i686 machine.
>
> `git describe`
> v0.16.0-4215-g1aa662b309
>
> I get an error when I run this command:
>
> `guix system disk-image --file-system-type=iso9660 -s i686-linux \
> gnu/system/install.scm`
>
> Below is all the output I have from the running the above command.

Well, that’s long time ago. Is it still an issue?

Cheers,
simon
S
S
Simon Tournier wrote on 4 Oct 2023 20:34
(name . mikadoZero)(address . mikadozero@yandex.com)(address . 35114-done@debbugs.gnu.org)
8734yqz16v.fsf@gmail.com
On Wed, 04 Oct 2023 at 20:31, Simon Tournier <zimon.toutoune@gmail.com> wrote:
Toggle quote (4 lines)
> On Tue, 02 Apr 2019 at 20:27, mikadoZero <mikadozero@yandex.com> wrote:

> Well, that’s long time ago.

So long that I get back:

Toggle snippet (6 lines)
Address not found

Your message wasn't delivered to mikadozero@yandex.com because the
address couldn't be found or is unable to receive email.

Closing.

Let me know if I miss something.

Cheers,
simon
Closed
?
Your comment

This issue is archived.

To comment on this conversation send an email to 35114@debbugs.gnu.org

To respond to this issue using the mumi CLI, first switch to it
mumi current 35114
Then, you may apply the latest patchset in this issue (with sign off)
mumi am -- -s
Or, compose a reply to this issue
mumi compose
Or, send patches to this issue
mumi send-email *.patch